Clothes Sticker Suppliers

What We Manufacture in This Category

As a Clothes Sticker Suppliers, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.

ADVAN Medical has produced adhesive medical consumables since 2003 and operates three factories in Suzhou, Jiangsu. The clothes sticker line applies that adhesive know-how to garments: the requirement is a patch that stays where it is placed against fabric, skin or shoe lining, absorbs or blocks what it is designed to absorb or block, and removes without leaving residue or pulling fibres.

We supply this family as an OEM/ODM manufacturer, which means the shape, colour, printed logo, carrier material, adhesive type, absorbency and retail packaging are all set against your brief. Standard constructions are available for brands that want to move quickly; custom die-cut shapes and Pantone-matched printing are available for brands building a distinct product identity.

Our Clothes Sticker Range and Where Each Type Fits

The five sub-families below share a common converting process but differ in carrier, adhesive and absorbent core. The table summarises the application fit and the specification points that drive the construction.

Hat Sweat Sticker

A non-woven carrier combined with a high-absorption pad, die-cut to sit inside the brim or sweatband. The adhesive must hold against repeated flexing and head movement while still releasing from the hat without tearing the lining.

Clothes Stain Protector Sticker

A transparent barrier film for collars, shirt linings and coat necklines. The engineering focus is optical clarity and a low-residue adhesive that will not mark dark wool, down or synthetic shell fabrics.

Disposable Sweat Pad

A self-adhesive absorbent pad for shirt collars and necklines, with stain-resistant and colour-change neckline variants. Absorbency, pad thickness and the balance between adhesion and comfort are the variables we tune per garment type.

Lingerie Tape

Double-sided skin-contact adhesive for garment fixing. Because it sits against skin, the adhesive formulation, breathability and edge cut quality are the critical parameters, and we produce it on the same skin-contact adhesive platform used across our body patch range.

Shoe Stain Protector Sticker

Contoured patches for heel and insole linings. Adhesive selection depends on whether the lining is leather, textile or synthetic, since each surface releases differently.

Materials and Adhesive Platform

We coat adhesive in-house and convert from jumbo rolls, so the carrier, adhesive and liner can be specified as a system rather than assembled from unrelated suppliers. Relevant material options include:

• Non-woven fabric carriers for absorbent and breathable constructions
• Transparent film carriers for stain-barrier and near-invisible applications
• Skin-contact adhesive formulations for lingerie tape and body-facing pads
• Absorbent pad cores with controlled thickness and uptake
• Silicone-coated release liners selected for clean peel at the point of use

Base materials are drawn from our Jumbo Raw Material Roll programme, which covers medical adhesive, backing and release paper. That vertical control is what allows us to keep adhesion, thickness and peel force consistent between the sample you approve and the production batch.

Configuration Options

Each product can be configured across the following dimensions. We confirm these against your garment type and retail channel before quoting.

• Shape and size: standard rectangles, curved brim cuts, contoured heel shapes or fully custom die-cut outlines
• Adhesive: removable, repositionable or higher-tack permanent grades, matched to fabric and skin contact
• Colour and print: natural, white, transparent, black or Pantone-matched, with logo and pattern printing
• Format: individual peel-open sachets, sheets, dispenser boxes, blister cards or bulk rolls
• Packaging: retail cartons, private-label artwork, multilingual instructions and barcode labelling

Quality Control and Compliance

Production runs under ISO 13485:2016 quality management, and our Suzhou factories comply with FDA requirements. Most of our products are CE certified. For adhesive products, the controls that matter are adhesive coat weight, peel adhesion, release force, dimensional tolerance and microbiological status where the item is skin-contact.

We retain samples and maintain traceability from raw material lot to finished carton, and we can supply the documentation set required for your target market. Where a product is positioned as a garment accessory rather than a medical device, we confirm the applicable regulatory route with you before sampling so the labelling and claims are correct from the first print run.

OEM/ODM, Sampling and Order Scope

We work as a one-stop OEM/ODM partner: product design, die development, adhesive formulation, cleanroom coating, converting and packaging are handled inside our own supply chain. More than ten technicians support ODM development, and our three factories cover both large-volume programmes and smaller trial orders.

Typical first samples are produced in 3–7 business days, with 1–3 modification rounds depending on product type. Minimum order quantities start at 1,000–10,000 units per specification for standard consumables; Pantone colour customisation and custom printed packaging carry higher minimums because of setup. Lead times run from roughly 20–60 days depending on whether tooling and packaging development are included.

Information We Use to Configure Your Solution

To prepare an accurate construction and quotation, we work from the following project inputs. The more precisely these are defined, the fewer sampling rounds are needed.

Related Adhesive Products

Brands building a broader adhesive accessory line often source several families from us in one programme. Our Wig Tape range uses comparable skin-contact adhesive technology, and our Medical Tape range covers non-woven, PE, silk, cotton and zinc oxide constructions for buyers who need both medical and consumer adhesive items from a single manufacturer.

Frequently Asked Questions

Can you produce clothes stickers under our own brand?

Yes. We operate as an OEM/ODM manufacturer, so shape, colour, logo printing, adhesive grade and retail packaging are all produced to your specification. We can also work from your existing sample and match its construction.

What is the minimum order quantity?

Standard consumables start at 1,000–10,000 units per specification. Pantone colour customisation begins at 20,000 units, and custom printed packaging at 100,000 units per packaging style, because of the setup involved.

How long does sampling and production take?

First samples are typically ready in 3–7 business days, with 1–3 revision rounds. Production lead time runs from about 20 days for standard products to 60 days for full turnkey programmes that include tooling and packaging development.

Are the adhesives safe for skin contact?

Lingerie tape and body-facing pads use skin-contact adhesive formulations produced under ISO 13485:2016 quality management in our Suzhou factories, which comply with FDA requirements. We confirm the appropriate formulation and documentation for your destination market during sampling.

Can you supply both finished retail packs and bulk rolls?

Yes. We deliver finished consumer packs, individual sachets, sheets and bulk converted rolls. Brands that assemble their own kits usually take bulk rolls or sheets; retail brands take printed cartons and dispenser formats.

Do you export to our market?

We have exported medical consumables to more than 60 countries across Southeast Asia, Africa, the Middle East, Eastern Europe, Russia, South America and Oceania, serving hospitals, distributors, first-aid suppliers and retail chains.