Non-woven Medical Tape Manufacturers

What We Manufacture in This Category

Non-woven medical tape is a spunlace or paper-based backing coated with a medical-grade adhesive, supplied on a release liner and wound into rolls, spools or cut lengths. Two constructions dominate clinical use, and we produce both.

• Non-woven paper medical tape – lightweight, highly breathable, hypoallergenic acrylic adhesive for cannula, catheter and light dressing fixation.
• Skin-tone non-woven paper tape – the same construction in a flesh tone for visible-area fixation and patient comfort.
• Soft non-woven cloth fixation sheets – higher tensile backing for securing large-area dressings, where conformability and peel strength matter more than transparency.

Both types are available as finished retail rolls, bulk spools for converting lines, or die-cut pieces. Related converting inputs sit in our Jumbo Raw Material Roll range, which covers backing, adhesive and liner selection for customers who buy semi-finished goods.

Application Fit Across Care Settings

Selection is driven by wear time, skin condition, moisture exposure and the load the tape must carry. The table below maps typical applications to the construction we recommend.

Backing, Adhesive and Liner Options

The backing determines breathability and hand feel; the adhesive determines peel behaviour and residue; the liner determines converting speed and die-cutting accuracy. We confirm all three against the intended wear time and skin population.

• Backing: non-woven paper, spunlace non-woven, soft non-woven cloth – white, skin tone or custom shade.
• Adhesive: medical acrylic, hypoallergenic acrylic, hot-melt options selected from our Medical Adhesive range.
• Liner: siliconised release paper or film, chosen for flatness and release consistency.
• Format: jumbo roll, spool, finished roll, zig-zag fold or die-cut pad.

Critical Specifications We Confirm Before Production

Every quotation is built on a fixed specification sheet so that the first article and the repeat order match. The parameters below are the ones that most often change clinical performance or converting yield.

Converting, Capacity and Automation Integration

Our Suzhou operations run three factories covering coating, rewinding, cutting and packaging in a controlled environment. For customers integrating our tape into their own converting lines, we supply spools and jumbo rolls with stable coat weight and controlled splice frequency so that die-cutting, slitting and flow-wrapping run without re-tensioning.

Where the tape feeds an automated packaging or labelling station, we agree unwind direction, liner release force and core specification in advance, then verify them on the first article rather than after shipment.

Quality Control and Acceptance

Production follows ISO 13485:2016 procedures, and our quality team inspects against the agreed specification at coating, converting and final packing. Most products in this range are CE certified, and our Suzhou factories comply with FDA requirements.

• Incoming inspection of backing, adhesive and release liner.
• In-process checks on coat weight, width and wind quality.
• Finished-goods checks on peel adhesion, dimensions and roll length.
• Sample retention and traceability records for each production batch.
• Stability and microbiological testing where the product specification requires it.

Acceptance criteria are written into the specification sheet, so incoming inspection at your warehouse tests the same values we tested at dispatch.

Customisation, Packaging and Delivery Scope

We handle OEM and ODM programmes from shape, colour and logo design through to material, size and packaging. Typical customisation for this category includes:

• Custom widths, roll lengths and core sizes for your converting equipment.
• Skin-tone matching and printed liner or backing branding.
• Retail cartons, dispenser packs, travel rolls and bulk cartons.
• Private-label artwork, barcodes and multilingual labelling.

Delivery scope is agreed per project: bulk spools, finished retail rolls, or finished goods packed for direct distribution. We confirm carton configuration, pallet pattern and shipping marks before production release.

Information We Use to Configure Your Solution

A precise proposal needs a small set of inputs. When these are clear, we can fix the construction, quote accurately and hold the specification across repeat orders.

• Intended application and expected wear time.
• Target width, roll length, core diameter and roll format.
• Backing type and colour, including skin-tone matching requirements.
• Adhesive preference and required peel behaviour.
• Packaging format, artwork status and labelling language.
• Estimated annual volume and first-order quantity.
• Destination market and any regulatory documentation required.
• Whether you buy finished tape or semi-finished rolls for your own converting.

Maintenance, Storage and Serviceability

Non-woven tape is a consumable, so serviceability means consistent supply and stable shelf behaviour rather than field maintenance. Store rolls in the original packaging, away from direct sunlight, at moderate temperature and humidity, and rotate stock on a first-in, first-out basis. Sealed cartons protect the adhesive from dust and moisture during transit and warehouse storage.

For repeat programmes we retain the approved sample and specification sheet, so reorders can be produced without re-qualification and spare or replacement volumes can be scheduled against your forecast.

Frequently Asked Questions

Are you a non-woven medical tape manufacturer or a trading company?

We are a manufacturer. ADVAN Medical operates three factories in Suzhou covering coating, rewinding, cutting and packaging, and we have produced medical consumables since 2003. Non-woven medical tape is coated and converted in-house, which is why we can control coat weight and roll geometry rather than reselling another plant's output.

Can you supply semi-finished rolls for our own converting line?

Yes. We supply jumbo rolls and spools with agreed width, core diameter, unwind direction and splice limits, so your slitting, die-cutting or flow-wrapping equipment runs without adjustment. Liner release force and wind tension are fixed in the specification sheet and verified on the first article.

What is the difference between paper tape and soft non-woven cloth tape?

Paper-based non-woven tape is thin, highly breathable and intended for light fixation such as cannulas and small dressings. Soft non-woven cloth tape uses a stronger backing for securing large-area dressings where tensile strength and conformability matter more than a low profile. We produce both and will recommend the construction against your wear time and load.

Which compliance documentation can accompany the shipment?

Production follows ISO 13485:2016 procedures, most products in this range are CE certified, and our Suzhou factories comply with FDA requirements. We prepare the documentation set required for your destination market and retain batch samples and traceability records for each production run.

Can you produce private-label rolls with our branding?

Yes. We handle OEM and ODM work covering backing colour, printed liner or backing branding, dispenser and retail cartons, barcodes and multilingual labelling. Share your artwork status and target packaging format, and we will confirm the tooling and packaging scope in the quotation.

What do you need to prepare an accurate quotation?

Send the application, target width and roll length, backing and adhesive preference, packaging format, estimated annual volume, destination market and any documentation requirements. With those inputs we fix the construction, confirm sampling, and issue a quotation that holds the same specification across repeat orders.