Scoop Stretcher Manufacturers

What a Scoop Stretcher Does in the Transfer Chain

A scoop stretcher is a detachable, clamshell-type device. The two halves separate, slide under the patient from either side, then lock together at the head and foot ends. The patient is lifted without being rolled or log-rolled, which is the reason the device is used where spinal, hip or pelvic instability is suspected and manual handling must be minimized.

In practice the scoop stretcher sits between the scene and the transport stretcher. It is used at roadside incidents, in confined indoor spaces, on stairways and in wards where a bed-to-trolley transfer would otherwise require several staff. Because the frame is narrow when closed and splits into two light halves, one or two responders can position it where a rigid spine board would be awkward.

• Scene extraction: lifting a casualty from ground level onto an ambulance trolley or spine board.
• Ward and imaging transfers: moving a patient between bed, trolley and imaging table with minimal repositioning.
• Mass-casualty and first-aid stations: a compact device that stores flat and deploys quickly.
• Pre-hospital kits: supplied to ambulance services, rescue teams and first-aid suppliers as part of a transfer set.

Our Scoop Stretcher Range and Configuration Options

We supply scoop stretchers in the configurations most often requested by distributors and emergency services. Frame length, latch type, surface finish and branding are the variables that change most between projects, and we confirm each one before production.

Materials, Load and Handling Specifications

The frame carries the patient during the lift, so the material and joint design determine both the working load and the service life. Aluminium alloy keeps the device light enough for one-person handling while retaining rigidity across the span; engineering plastic reduces weight further and avoids cold-metal contact, but the load path through the hinges becomes the critical design point.

• Working load: stated per model and confirmed against the patient population the device will serve.
• Frame span: closed and extended lengths, matched to trolley width and door clearances.
• Device weight: relevant to single-responder deployment and to air or vehicle kit limits.
• Locking security: positive engagement at both ends, with no partial-lock position.
• Surface: smooth, non-porous and compatible with routine disinfectants.
• Edge treatment: rounded frame edges and no exposed fasteners that could snag clothing or sheets.

Application Fit Across the Patient Transfer Range

Scoop stretchers rarely ship alone. Distributors and hospital groups usually order them as part of a transfer set, and we quote the range together so the devices complement each other rather than overlap.

OEM, ODM and Branded Supply

Our Suzhou operation runs OEM and ODM programmes across the medical range, and scoop stretchers follow the same route: shape, colour, logo, specification, size and packaging can be tailored to your market. More than ten technicians support ODM work, and our integrated supply chain keeps material sourcing through to finished goods inside our own factories.

For a scoop stretcher project this usually means a private-label frame colour and printed label, a branded carry bag, and carton artwork that matches the rest of your transfer range. Where you already sell related consumables, we can align the packaging style so the transfer line looks like one family on the shelf.

• Private-label frame colour and logo placement.
• Instruction sheet and label text in your target language.
• Carry bag, strap set and carton configuration.
• Mixed container loading with other Patient Transfer items.

Quality Control and Acceptance

Our quality control team follows documented inspection procedures to keep production aligned with ISO 13485:2016, and most of our products are CE certified. Our Suzhou factories comply with FDA requirements. For scoop stretchers, inspection focuses on the points that decide whether the device is safe in the field.

• Latch function: repeated assembly and release checks on every batch.
• Frame integrity: visual and dimensional checks on tube, hinge and end fittings.
• Load verification: static load testing against the declared working load.
• Surface inspection: finish, burrs, sharp edges and coating coverage.
• Traceability: sample retention and batch records for the supplied configuration.
• Pre-shipment inspection: carton count, label accuracy and packaging condition.

Where a project requires third-party inspection or specific test documentation, we confirm the scope at quotation stage so the acceptance route is agreed before production starts.

Installation, Maintenance and Spare Parts

A scoop stretcher needs no installation, but it does need correct deployment and a simple maintenance routine. We supply the device with operating instructions covering assembly, patient positioning, strap routing and inspection intervals, and we can provide training material for distributor sales teams.

• After each use: wipe the frame and latches with a compatible disinfectant, then dry before storage.
• Periodic check: verify latch engagement, hinge play and strap condition.
• Storage: keep flat and separated from heavy equipment to avoid frame distortion.
• Spares: straps, carry bags and latch components can be supplied as separate line items.

For distributors, we can quote a spares pack alongside the main order so end users have replacement straps and bags without a separate shipment.

Information We Use to Configure Your Solution

Our proposal is based on the working point, the patient population and the market the product will be sold into. The more precisely these are defined, the faster we can confirm a specification and price.

We also supply related consumables that often appear in the same tender, including Wound Dressing, Medical Tape and Electrode Pad ranges, which can be consolidated into one shipment with the transfer equipment.

Frequently Asked Questions

What is a scoop stretcher used for?

It lifts a patient without rolling them. The two halves slide under the body from either side and lock at the head and foot, so it is used where spinal, hip or pelvic injury is suspected, and in any situation where minimizing patient movement matters more than speed of transfer.

Can ADVAN Medical produce scoop stretchers under our own brand?

Yes. We run OEM and ODM programmes from our Suzhou factories, covering frame colour, logo, label text, carry bag and carton artwork. Our team confirms the specification and packaging scope before production, and we can align the design with the rest of your transfer or first-aid range.

What information do you need to quote a scoop stretcher order?

The intended user and setting, patient size range, required working load, target market, branding and packaging requirements, order quantity per specification, and your sample and approval expectations. With those confirmed we can propose a frame material, length configuration and packaging route, then issue a quotation.

How is quality controlled before shipment?

Our quality control team inspects latch function, frame integrity, load performance, surface finish and labelling on each batch, following procedures aligned with ISO 13485:2016. Most of our products are CE certified and our Suzhou factories comply with FDA requirements. Batch records and retained samples support traceability, and pre-shipment inspection covers carton count, labels and packaging condition.

Do you supply spare parts and accessories?

Straps, carry bags and latch components can be supplied as separate line items, either with the main order or as a distributor spares pack. We recommend keeping replacement straps and bags in stock so end users can maintain devices without waiting for a full shipment.

Which markets do you export to?

We have exported medical equipment and consumables to more than 60 countries, including Southeast Asia, Africa, the Middle East, Eastern Europe, Russia, South America and Oceania. Our customers include hospitals, first-aid suppliers, medical distributors and retail shops, and we prepare documentation to suit the destination market.