ABS Transfer Trolley Manufacturers

Our ABS Transfer Trolley Range

Our patient transfer trolleys are built around an ABS thermoplastic platform. ABS gives the trolley a smooth, sealed surface that resists staining and repeated disinfection, while keeping the overall unit light enough for one or two staff to move through corridors and doorways.

Each trolley is configured for a specific working environment rather than sold as a single fixed model. The table below shows the main configuration choices we discuss with project teams.

Where ABS Transfer Trolleys Fit

ABS transfer trolleys sit between a fixed hospital bed and a stretcher. They are used where a patient must be moved horizontally with minimal lifting, and where the equipment itself must be easy to clean between patients.

• Emergency departments: rapid intake from ambulance bay to treatment bay, with side rails raised and IV pole fitted.
• Wards and recovery rooms: bed-to-trolley transfer for surgery, endoscopy and day procedures.
• Imaging and diagnostics: height adjustment to align with scanner or X-ray tables.
• Infection-control areas: sealed ABS surfaces tolerate routine disinfectant wiping.
• Distributor and tender supply: consistent configuration across a fleet of trolleys for a single hospital group.

Materials and Critical Specifications

We build the trolley platform from ABS thermoplastic, chosen for impact resistance, low weight and chemical tolerance. Frame and rail components are specified according to the load and duty cycle agreed for the project.

• Platform material: ABS molded top with smooth, non-porous finish.
• Load capacity: confirmed against the intended patient weight range and accessory load.
• Height range: matched to the bed heights and imaging tables in the receiving facility.
• Rail height and locking: selected for the patient group and staff workflow.
• Caster diameter and braking: chosen for floor type, ramp use and corridor width.
• Surface finish: specified for the disinfectants used by the hospital.

Ergonomics, Safety and Infection Control

Patient transfer is a manual-handling risk for nursing staff. We configure the trolley so the working height can be set close to the bed surface, reducing the lift distance during lateral transfer.

Safety features are treated as part of the base specification, not add-ons: locking side rails, braked casters, and a platform edge that helps keep the mattress pad in position. The ABS surface has no exposed seams on the patient-contact area, which supports routine wipe-down disinfection between cases.

OEM/ODM and Project Support

ADVAN Medical operates as an OEM/ODM partner as well as a standard-product supplier. For ABS transfer trolley projects, our one-stop service covers shape, colour and logo design through to material, specification, size and packaging decisions.

Our engineering and sales teams work from the project brief rather than a fixed catalogue page. Where a hospital group needs a consistent trolley fleet, we align configuration across units so that accessories, rails and casters are interchangeable.

We also supply the wider patient transfer and hospital furniture range, including ambulance trolleys, folding stretchers, scoop stretchers, spine boards, soft stretchers and vacuum stretchers, alongside hospital bedside cabinets, IV poles and medical trolleys. Related consumable lines such as Wound Dressing and Medical Tape are produced in the same quality system, which simplifies consolidated purchasing for distributors.

Quality Assurance and Acceptance

Our quality control team follows documented inspection procedures under ISO 13485:2016. Most of our products are CE certified, and our Suzhou factories comply with FDA requirements. For trolley projects, we agree the inspection points with the customer before production.

• Incoming inspection of ABS components, frame parts and casters.
• In-process checks on assembly, rail locking and height mechanism.
• Functional test of casters, brakes and height adjustment before packing.
• Visual and dimensional check against the approved drawing or sample.
• Sample retention and traceability records for the delivered batch.

Installation, Maintenance and Spare Parts

ABS transfer trolleys are delivered assembled or in knock-down form depending on shipping and storage requirements. We supply assembly instructions and, where needed, support the distributor's technical team during first installation.

Routine maintenance is limited to caster inspection, brake function, rail locking and cleaning of the ABS surface. We can supply replacement casters, rails, IV poles and mattress pads as separate items so that a hospital fleet can be kept in service without replacing whole trolleys.

Information We Use to Configure Your Solution

To prepare a suitable ABS transfer trolley configuration and quotation, we work from the following project inputs. The more precisely these are defined, the closer the first proposal will be to the final specification.

• Intended department and transfer route, including door widths and lift dimensions.
• Patient weight range and whether bariatric use is required.
• Required height range and the bed or table heights it must match.
• Side rail preference and locking method.
• Caster size, floor type and braking preference.
• Accessories required: IV pole, tray, oxygen holder, drainage hooks.
• Branding, colour and packaging requirements.
• Target market and any documentation needed for import or tender.
• Order quantity and delivery schedule.

Frequently Asked Questions

What is an ABS transfer trolley used for?

It is a wheeled patient transport platform used to move a patient horizontally between a bed, an imaging table or a treatment bay. The ABS top gives a smooth, cleanable surface, and the height adjustment lets staff align the trolley with the bed to reduce manual lifting.

Can ADVAN Medical customize the trolley for our brand?

Yes. As an OEM/ODM supplier we can tailor colour, logo marking, platform configuration, accessories and packaging. Our one-stop service covers design, specification and packaging decisions so a distributor can build a complete own-brand trolley line.

What quality documentation is available?

Our production follows ISO 13485:2016 quality management, most products are CE certified, and our Suzhou factories comply with FDA requirements. For a specific trolley order we agree inspection points and provide batch traceability records.

Do you supply spare parts and accessories separately?

We can supply replacement casters, side rails, IV poles, mattress pads and storage trays as separate items, which helps hospitals and distributors maintain a trolley fleet over time.

What is the minimum order quantity for ABS transfer trolleys?

MOQ depends on the configuration and level of customization. Standard configurations can be supplied in smaller batches, while custom colour, logo and packaging programmes carry higher minimum quantities. We confirm the exact MOQ when we review your project brief.

How do we start a project with ADVAN Medical?

Send us the intended department, patient weight range, height requirements, accessory list and target market. Our team will return a configuration proposal, sample plan and quotation based on those inputs.