Paraffin Cotton Ball Manufacturers

What We Manufacture in This Category

Paraffin cotton balls sit inside our Medical Cotton Products family. The construction is straightforward but the performance depends on two variables: the quality and absorbency of the cotton, and the grade and quantity of paraffin oil carried in each ball. We control both, because the cotton is converted and the oil is dosed in our own production flow rather than bought in as a finished article.

The same cotton base feeds our other cotton formats, which means a distributor can build a coherent cotton shelf from one supplier: plain absorbent balls for general use, paraffin balls for lubrication and non-stick tasks, and medicated variants where a different active medium is required.

Where Paraffin Cotton Balls Fit

• Catheter and tube lubrication: the most common clinical use, where a lubricated ball prepares a catheter, feeding tube or similar device for insertion.
• Non-stick wound protection: applying a protective oily layer in the same way paraffin gauze is used, keeping the dressing from adhering to the wound surface.
• Skin conditioning and cleaning: wiping or conditioning skin areas, and applying topical preparations where an oil carrier is acceptable.
• Care and procedure kits: packed as a component inside catheter care, ostomy and first-aid kits where a single-use lubricated swab is convenient.

Range and Configuration Options

We build paraffin cotton balls to the working point rather than to a single fixed specification. The table below shows the configuration variables we normally confirm before quoting, together with the practical effect of each choice.

Materials and Critical Specifications

Paraffin oil is a refined liquid mineral oil, and its viscosity grade is the single most important input after the cotton itself. A heavier oil gives longer-lasting slip on a catheter; a lighter oil spreads more easily and leaves less residue. We confirm the intended clinical task first, then select the oil grade and loading level to match it.

• Cotton purity and fibre: clean, low-residue absorbent cotton with consistent staple length so the ball holds together during handling.
• Oil grade and viscosity: matched to the lubrication duty and to the temperature range in the target market.
• Oil-to-cotton ratio: the practical determinant of lubricity, drip behaviour and residue.
• Ball weight tolerance: kept tight so that a stated count per pack delivers a predictable oil dose.
• Odour and appearance: neutral odour and clean white appearance for clinical acceptance.
• Packaging barrier: pouch and carton materials selected so the oil does not migrate or stain before use.

Quality Control and Compliance

Our quality control team works to inspection procedures aligned with ISO 13485:2016, and most of our products are CE certified. Our Suzhou factories comply with FDA requirements. For paraffin cotton balls this translates into incoming checks on cotton and oil, in-process checks on oil loading and ball weight, and finished-goods checks on packing count, seal integrity and appearance.

We keep sample retention and traceability records so that a delivered batch can be traced back through its material lots. Where a project needs documentation for a specific market, we prepare the technical file content to suit that destination rather than issuing a single generic pack.

Acceptance Points We Agree With You

• Ball weight and count per pack against the approved specification.
• Oil loading verified by weight gain across the batch.
• Seal strength and barrier integrity on pouches and sachets.
• Visual criteria: whiteness, freedom from loose fibre and foreign matter.
• Carton labelling, artwork version and shipping-mark accuracy.

OEM/ODM and Project Support

We run paraffin cotton balls as an OEM/ODM programme. That covers the product itself, the pouch or sachet format, the carton, the artwork and the shipping marks. Our in-house R&D and technical team handles specification development, and our sales and after-sales teams stay with the project from first sample through repeat order.

Because we convert our own cotton and produce our own adhesive and tape materials, a paraffin cotton ball order can be combined with related items from our range. Distributors building a wound-care or procedure-kit line often pair this product with Wound Dressing formats and Medical Tape in the same shipment, which simplifies incoming inspection and reduces the number of suppliers on the approved list.

Information We Use to Configure Your Solution

Our proposal is based on the working point, the material and the production target. The inputs below let us quote a specification that will pass your incoming inspection on the first delivery.

• Clinical task: catheter lubrication, non-stick wound protection, skin conditioning or kit component.
• Device or application detail: catheter or tube type and diameter where lubrication is the duty.
• Target ball size and weight: or the count per pack you need to sell.
• Oil loading preference: light, medium or heavy, or a target weight gain.
• Sterility requirement: non-sterile bulk or sterile single-use, with the packaging format that follows.
• Packing and branding: pouch, sachet, bulk bag or kit component, plus artwork and language requirements.
• Order volume and delivery schedule: first order quantity, repeat pattern and destination port.
• Market documentation: the destination market and the compliance evidence needed for that market.

Packaging, Delivery and Serviceability

Paraffin cotton balls are packed to protect the oil load. We select pouch and carton materials that resist oil migration, and we agree the count per pack, the carton configuration and the shipping marks before production. Delivery scope is confirmed per order, including the packing list, batch identification and any market-specific labelling.

For repeat programmes we hold the approved specification and artwork on file, so reorders are produced against the same reference. Spare capacity across our three factories lets us handle both large-volume and smaller-batch orders, and our lower MOQ policy supports distributors testing a new line before committing to volume.

Frequently Asked Questions

What are paraffin cotton balls used for?

The main clinical use is lubricating catheters, feeding tubes and similar devices before insertion. They are also used for non-stick wound protection, in the same way paraffin gauze is applied, and for skin conditioning or applying topical preparations where an oil carrier is suitable.

Can you supply paraffin cotton balls under our own brand?

Yes. We run this product as an OEM/ODM programme covering the ball specification, the pouch or sachet format, the carton and the printed artwork. You provide the brand and the market requirement; we handle specification development, production and packing.

How do you control the amount of paraffin oil in each ball?

We dose the oil by weight gain and verify it in process, so the oil-to-cotton ratio stays within the agreed band across the batch. Ball weight is also checked against the approved specification, because a stated count per pack only delivers a predictable oil dose if the individual ball weight is consistent.

Are your paraffin cotton balls sterile?

We supply both non-sterile bulk and sterile single-use formats. The sterility route determines the process flow, the packaging barrier and the documentation scope, so we confirm it at the quotation stage rather than assuming one option.

What quality standards apply to your production?

Our quality control team works to inspection procedures aligned with ISO 13485:2016, most of our products are CE certified, and our Suzhou factories comply with FDA requirements. We retain samples and traceability records so a delivered batch can be traced back through its material lots.

What is the minimum order quantity for paraffin cotton balls?

Our MOQ for medical consumables starts at 1,000 to 10,000 units per specification, with higher thresholds for custom Pantone colours and custom printed packaging. We confirm the exact figure once the ball size, oil loading, packing format and branding requirements are fixed.