Medical Trolley Manufacturers

What We Supply in the Medical Trolley Range

Our trolley range covers the mobile storage and transport functions that clinical departments actually work with: dressing and treatment carts, medication and infusion carts, emergency carts and general utility trolleys. Each unit is a mobile platform with shelving, drawers, worktop and castors, and we configure the drawer count, worktop format and accessory set around the department it serves.

Because we also manufacture consumables, dressings, tapes and first-aid products, we can supply trolleys alongside the consumables that fill them — useful for distributors building a single hospital furniture and consumables order. The wider wholesale Medical Trolley manufacturers range sits inside our hospital furniture category together with bedside cabinets, IV poles and waiting chairs.

Trolley Types and Where Each One Fits

Materials and Build Decisions

Material choice drives cleaning routine, service life and price, so we confirm it early. ABS bodies give a moulded, seamless shell that resists staining and is quick to disinfect; stainless steel frames and shelves suit higher loads and repeated wet cleaning in theatre and sterile-processing areas. Many trolleys combine both — an ABS drawer stack on a steel chassis.

• Body: ABS moulded shell, stainless steel frame, or hybrid construction.
• Worktop: flat ABS, stainless steel tray, or recessed top with retaining lip.
• Drawers: single-row or multi-row, with or without central lock and dividers.
• Castors: 75–125 mm wheels, two braked, swivel front pair for tight corridors.
• Accessories: waste bins, glove holders, IV poles, monitor shelves, side rails, push handles.

Critical Specifications We Confirm

Medical trolleys are specified by dimensions and load, not by appearance. We work from the department layout and the equipment the trolley must carry, then fix the numbers below before production.

• Overall length, width and height, and worktop height for standing or seated use.
• Static and dynamic load rating, including the heaviest single item carried.
• Drawer internal dimensions and the compartment layout for the items stored.
• Castor diameter, braking arrangement and floor clearance for thresholds and lifts.
• Surface finish and the cleaning agents the trolley will meet in daily use.
• Colour and branding position for OEM and ODM orders.

Configuration, OEM and ODM Support

We run a one-stop customisation service covering shape, colour, logo, material, specification, size and packaging. For trolleys this means drawer counts, shelf spacing, accessory brackets, castor type and the colour of the ABS shell can all be set to your requirement, with your logo applied to the body or drawer front.

Our R&D team supports ODM work where the design is developed with us and marketed under your brand, and OEM production where you supply the design and we manufacture. Sampling for customised items typically runs 3–7 business days for the first sample, with 1–3 modification rounds depending on complexity. Minimum order quantities start from 1,000–10,000 units per specification for our consumable range, while medical equipment quantities are quoted per project, and customised packaging carries its own minimum.

Quality Control and Compliance

Our quality control team works to written inspection procedures across raw material intake, in-process checks and final inspection, under an ISO 13485:2016 quality management system. Most of our products are CE certified and our Suzhou factories comply with FDA requirements. We maintain sample retention and traceability records so a delivered batch can be traced back through production.

For trolley orders we agree the inspection points in advance: frame and weld inspection, drawer operation and lock function, castor rolling and braking, load testing on the assembled unit, surface finish and hardware torque. Where a project needs documentation for a tender or import file, we prepare the compliance paperwork that matches the target market.

Installation, Maintenance and Spare Parts

Most trolleys ship assembled or with the castor set and accessories to be fitted on site; we supply the fastening hardware and fitting sequence with each consignment. Commissioning is a matter of checking drawer travel, lock alignment, castor braking and worktop seating before the unit enters clinical use.

• Routine checks: castor wear and debris, brake function, drawer runners, lock catch.
• Cleaning: wipe-down with compatible disinfectants; avoid abrasive pads on ABS surfaces.
• Spares: castors, drawer runners, locks, keys, bins and shelf brackets are available as separate items.
• Documentation: packing list, assembly instructions and inspection records travel with the order.

Information We Use to Configure Your Solution

Our proposal is based on the working point, the material and the production target. Send the following and we can return a configuration and quotation rather than a generic catalogue price.

• Department and clinical function the trolley serves.
• Items to be stored or carried, with approximate weights and dimensions.
• Required drawer count, compartment layout and locking arrangement.
• Preferred material: ABS, stainless steel or hybrid.
• Accessories needed: bins, IV pole, monitor shelf, glove holder, side rails.
• Colour, logo placement and packaging requirement for OEM/ODM.
• Order quantity per specification and target delivery schedule.
• Destination market and any documentation required for import or tender.

Related Products in Our Range

Medical trolleys sit alongside the consumables and dressings that stock them. Distributors often combine a trolley order with our Wound Dressing range and Medical Tape range, and with Electrode Pad items for diagnostic and monitoring departments. Supplying these from one factory simplifies incoming inspection and consolidates shipping.

Frequently Asked Questions

Are you a medical trolley manufacturer or a trading company?

We are a manufacturer. ADVAN Medical operates three factories in Suzhou and has produced medical equipment and consumables since 2003, with medical trolleys forming part of our hospital furniture range. We handle production, quality inspection and export directly.

Can you produce trolleys to our own design and brand?

Yes. We offer both OEM and ODM cooperation. Under OEM you supply the design and we manufacture; under ODM we develop the design with you and you market it under your brand. Shape, colour, logo, material, size and packaging can all be tailored.

What is the minimum order quantity for medical trolleys?

Minimum order quantity depends on the model and the level of customisation. Our consumable range starts at 1,000–10,000 units per specification, while medical equipment such as trolleys is quoted per project. Customised packaging carries a separate minimum, and Pantone colour matching raises it further.

How long does sampling and production take?

First samples for customised items typically take 3–7 business days, with 1–3 modification rounds depending on complexity. Production lead time varies with cooperation mode and product complexity; turnkey projects involving moulds, packaging and finished product generally run 30–60 days, while standard products with packaging run 20–50 days.

What quality documentation accompanies a trolley order?

Orders are produced under our ISO 13485:2016 quality management system, and most of our products are CE certified with our Suzhou factories complying with FDA requirements. Inspection records, packing lists and assembly instructions travel with the consignment, and we prepare market-specific compliance documentation where the destination requires it.

Can we order trolleys together with consumables?

Yes. Because we manufacture dressings, tapes, electrode pads and first-aid products in the same group, a single order can combine hospital furniture with the consumables that fill it. This reduces the number of suppliers in your incoming inspection and consolidates freight.