Enteral Nutrition Bag Manufacturers

What We Manufacture in This Category

An enteral nutrition bag holds and delivers liquid formula, medication or reconstituted nutrients directly into the gastrointestinal tract. It serves patients who cannot take food orally after surgery, during critical illness, or because of swallowing difficulty. Our production focuses on the bag body, tubing set, connector interfaces and closure hardware as one integrated consumable.

• Pump feed type tube feeding bag — 500 / 1000 / 1200 / 1500 ml, designed for volumetric pump delivery where flow rate is set by the pump.
• Disposable gravity enteral feeding bag set — gravity-driven administration with a roller or slide clamp for manual rate control.
• Pump feed dual-bag tube feeding system — 1000 ml / 1200 ml, with spike and screw spike options for different formula container interfaces.

As a China-based Enteral Nutrition Bag Manufacturers operation, we produce these items as standard catalogue products and as private-label configurations. Buyers working through distribution channels often source the same range as wholesale Enteral Nutrition Bag manufacturers supply, with packaging and labelling adapted to the destination market.

Range and Application Matching

Selection usually starts from the delivery method, then the volume, then the connector interface. The table below maps our supplied formats to typical clinical and procurement scenarios.

Materials and Critical Specifications

The bag body, tubing, drip chamber and connectors are the components that determine how a set performs at the bedside. We confirm the following points against each order before production.

• Bag film and construction — medical-grade flexible film with sealed seams, sized to the nominal volume with headroom for formula and flushing.
• Tubing bore and length — matched to pump compatibility and the distance between bag hanger and patient connection.
• Connector interface — the patient-side end must match the feeding tube or extension set in use; this is the most common source of mismatch in a new order.
• Spike type — spike or screw spike, chosen against the formula container the hospital or home user actually opens.
• Graduation markings — printed volume scale for visual verification of remaining formula.
• Clamp type — roller or slide clamp for gravity sets; pump sets rely on the pump for rate control.
• Hanger and eyelet — must hold the filled bag weight on standard IV poles and bed rails.

Sterility, packaging format and labelling are defined per order. We produce under ISO 13485:2016 procedures, and documentation can be prepared to align with EU and FDA requirements for the target market.

Configuration Options and OEM/ODM Support

Our customization scope covers shape, colour, logo, material, specification, size and packaging. For enteral nutrition bags, the practical configuration levers are:

• Nominal volume and bag geometry
• Single-bag or dual-bag system layout
• Spike or screw spike inlet
• Tubing length, bore and connector type
• Printed graduations, brand mark and instruction panel
• Unit packaging, sterile barrier format and shelf-carton configuration

We operate three factories and hold more than 200 SKUs across the medical consumables portfolio, which allows both large-volume programmes and smaller launch quantities. Minimum order quantities start from 1,000–10,000 units per specification for medical consumables, with higher thresholds for Pantone colour customization and custom printed packaging. Sampling typically runs 3–7 business days for a first sample, with 1–3 modification rounds depending on product type.

Quality Control and Acceptance

Quality control runs from incoming raw material through coating, converting, assembly and packaging in a cleanroom environment. Our quality team follows documented inspection procedures aligned with ISO 13485:2016, and we maintain sample retention and traceability records.

• Incoming material checks against agreed specification
• In-process inspection of seals, tubing assembly and connector fit
• Finished-product inspection before packing
• Stability and microbiological testing where the product scope requires it
• Retained samples and batch traceability for post-delivery reference

Acceptance criteria are agreed in writing before mass production, so that the first article, the pre-shipment inspection and the delivered batch are measured against the same specification.

Installation, Use and Maintenance Context

Enteral nutrition bags are single-use consumables, so serviceability centres on correct handling and replacement rather than repair. The points that affect day-to-day reliability are straightforward.

• Hang the bag on a stable pole or rail at the height the delivery method requires.
• Prime the tubing to remove air before connecting to the feeding tube.
• Confirm the connector locks correctly to the patient-side interface.
• Follow the facility's change interval for the set, and do not reuse a single-use bag.
• Store sealed units away from direct sunlight and moisture, within the labelled shelf life.

We supply product documentation and labelling content to support ward-level training and distributor instruction material. Spare-part logic does not apply to a disposable set; continuity comes from consistent batch supply and stable specifications across repeat orders.

Related Products in Our Postoperative Nutrition Line

Enteral nutrition bags are usually ordered together with the accessories that complete a feeding protocol. Our postoperative nutrition range includes feeding tubes and irrigation syringes, and the wider catalogue covers the dressings and tapes used around surgical and catheter sites.

• Wound Dressing — for postoperative and catheter-site care alongside nutrition support.
• Medical Tape — fixation of tubing and dressings at the bedside.
• Jumbo Raw Material Roll — base materials for converters and larger-volume programmes.

Information We Use to Configure Your Solution

A workable quotation depends on a small set of inputs. When these are clear, we can confirm the format, the tooling or artwork requirements and the production plan.

Send the working point, the patient-side interface and the production target, and we will return a configuration with the corresponding specification sheet and quotation.

Frequently Asked Questions

Which enteral nutrition bag formats does ADVAN Medical manufacture?

We produce pump feed type tube feeding bags in 500, 1000, 1200 and 1500 ml, disposable gravity enteral feeding bag sets, and pump feed dual-bag systems in 1000 ml and 1200 ml with spike or screw spike options.

Can you match a specific feeding tube connector?

Yes. The patient-side connector is confirmed against the feeding tube or extension set in use before production, so the set locks correctly at the bedside. Send the mating part or its drawing with the enquiry.

Do you offer OEM and ODM service for private-label feeding bags?

We provide both. OEM covers production to your design and brand; ODM covers design development with us and marketing under your brand. Customization spans shape, colour, logo, material, specification, size and packaging.

What are the minimum order quantities and sampling times?

MOQ starts from 1,000–10,000 units per specification for medical consumables, rising for Pantone colour customization and custom printed packaging. First samples typically take 3–7 business days, with 1–3 modification rounds depending on the product.

Which quality standards apply to your enteral nutrition bags?

Production follows ISO 13485:2016 quality management procedures, most of our products are CE certified, and our Suzhou factories comply with FDA requirements. Documentation can be prepared to align with EU and FDA requirements for the destination market.

How are the bags packed and delivered?

Unit packaging, sterile barrier format and shelf-carton configuration are agreed per order, then packed for export from Suzhou. Delivery scope and carton marking are confirmed at order stage so the shipment matches your warehouse and distribution requirements.