Feeding Tube Manufacturers

What a Feeding Tube Set Does in the Care Pathway

A feeding tube delivers nutrients, fluids and medications directly to the stomach or small intestine. The type selected depends on how long the patient needs enteral support and on their digestive condition, which is why the delivery set — not only the tube — has to match the feeding method used on the ward.

• Gravity feeding: relies on a roller clamp or slide clamp to hold a stable drip rate from the nutrition container to the patient line.
• Pump-assisted feeding: requires tubing with consistent internal diameter so the pump delivers the set rate without alarm cycling.
• Bolus and intermittent feeding: favours a set with a firm spike and a wide-bore connection for syringe or gravity delivery.
• Medication administration: needs a port that can be flushed without disconnecting the main line.

Our Feeding Tube Range and Where Each Type Fits

The three sets below share the same clinical purpose but differ in how they connect to the nutrition container and the feeding line. Matching the connector to the ward's existing containers and pumps avoids adapters and reduces handling steps.

Because the feeding tube sits inside the postoperative nutrition category, it is normally ordered alongside the enteral nutrition bag and irrigation syringe so that a ward receives a complete feeding routine rather than a single component.

Materials and Construction Points That Affect Performance

Feeding sets are judged on how they behave during a shift, not only on the specification sheet. We build the range around medical-grade polymer tubing and connectors, with the fluid path kept free of sharp transitions that could trap formula residue.

• Tubing: flexible, kink-resistant PVC with a smooth bore for consistent flow and easier flushing.
• Connectors and caps: moulded to hold a firm seal under normal handling and repeated connection.
• Spike: rigid enough to pierce the container port cleanly without deforming.
• Flow control: roller or slide clamp positioned for one-handed adjustment at the bedside.
• Access ports: sized for standard syringes used in flushing and medication delivery.

Configuration Options We Build Into the Range

Configuration is decided by the feeding method, the container format already in use and the packaging the market expects. We confirm these variables before quoting so the sample and the production order describe the same product.

Quality Control and Documentation

Feeding sets are produced under ISO 13485:2016 quality management, and our Suzhou factories comply with FDA requirements. Most of our products are CE certified. A dedicated quality inspection team works to written inspection procedures covering incoming materials, in-process checks and finished goods.

• Incoming inspection of tubing, connectors and packaging materials.
• In-process checks on assembly, seal integrity and clamp function.
• Finished goods inspection before release, with retained samples and traceability records.
• Documentation prepared to match the regulatory route of the destination market.

OEM/ODM Support and Project Coordination

Our ODM/OEM service covers product design, mould development, formulation work, production and packaging, so a feeding tube programme can be handled without splitting the work across separate packaging and assembly suppliers. More than ten technicians support custom development, and our three factories allow both large-volume and smaller-batch orders.

Sampling typically runs 3–7 business days for a first sample, with one to three modification rounds depending on the product type. Custom packaging and Pantone colour matching carry higher minimum order quantities, which we confirm at quotation stage. Where a project needs adhesive-coated components, our in-house material capability covers the Jumbo Raw Material Roll range used across our tape and dressing lines.

Information We Use to Configure Your Solution

A feeding tube quotation is only accurate when it reflects the feeding method, the container format and the market the product will be sold into. We work from the following inputs.

Storage, Handling and Serviceability

Feeding sets are single-use sterile consumables. They should be stored in a dry, ventilated area away from direct sunlight and used before the expiry date printed on the pouch. Packaging integrity is checked before opening, and the set is discarded after use according to the facility's clinical waste procedure.

For distributors, the practical service questions are stock rotation, shelf-life remaining on delivery and the availability of replacement stock in the same specification. We hold retained samples and traceability records so that a batch can be traced if a customer raises a query after delivery.

Frequently Asked Questions

Which feeding tube set should be used for pump feeding?

Pump feeding needs tubing with a consistent bore and a clamp that holds position, so the pump delivers the set rate without repeated alarms. The sterile tube feeding infusion line with spike is the usual choice when the nutrition container is a bottle or bag with a pierceable port.

Can ADVAN Medical supply feeding sets under our own brand?

Yes. Our ODM/OEM service covers product design, mould development, production and packaging, including printed pouches, cartons and instructions carrying the customer's brand. Custom packaging carries a higher minimum order quantity than standard packaging, which we confirm during quotation.

What is the minimum order quantity for feeding tube sets?

For our medical consumables range, the minimum order quantity starts at 1,000–10,000 units per specification. Pantone colour customisation starts at 20,000 units, and custom packaging begins at 100,000 units per packaging style and printing pattern.

How long does sampling and production take?

A first sample is normally ready in 3–7 business days, with one to three modification rounds available depending on the product. Production lead time varies with the cooperation mode and product complexity; standard product with packaging typically runs 20–50 days, and turnkey projects including mould development run 30–60 days.

What quality documentation is available for feeding tube orders?

Production follows ISO 13485:2016 quality management, our Suzhou factories comply with FDA requirements, and most of our products are CE certified. We maintain inspection records, retained samples and traceability data, and can prepare documentation to match the regulatory route of the destination market.

Can feeding sets be ordered together with other postoperative nutrition items?

Yes. Feeding tubes are part of our postoperative nutrition range and are commonly ordered with enteral nutrition bags and irrigation syringes, so a distributor can consolidate a ward feeding programme into one shipment and one documentation set.