Medical Adhesive Manufacturers

Our Position in the Medical Adhesive Category

We are a wholesale Medical Adhesive manufacturers and OEM/ODM factory, not a trading intermediary. Adhesive formulation, coating, rewinding and quality inspection sit inside our own production chain, which lets us hold a specification across repeat orders and adjust it when a customer changes backing, liner or converting equipment.

Medical adhesives are the functional core of every jumbo roll we supply. The formulation has to balance tack, peel strength, shear holding and skin compatibility at the same time, and it must remain stable through the customer's coating, drying, slitting and storage steps. We treat those as one engineering problem rather than separate purchasing items.

Adhesive Systems We Supply

Four established adhesive chemistries cover most medical tape, dressing and patch programmes. Selection depends on skin contact duration, breathability, converting temperature and the regulatory route of the finished product.

Each system is supplied in jumbo roll form so that converters can run their own coating, lamination, slitting or die-cutting process without changing the adhesive specification between batches.

Where Our Adhesive Rolls Fit

Our adhesive materials are used across the medical consumable families we manufacture and supply, and we match the adhesive grade to the end product rather than to a single generic specification.

• Medical tape jumbo rolls — non-woven, PE, silk, cotton and zinc oxide constructions, where adhesive choice controls unwind, conformability and residue on removal.
• Wound dressing platforms — hydrocolloid, foam, transparent film, alginate and silicone contact layer products, where adhesive must hold the dressing in place without traumatising the wound margin.
• Electrode and body patch products — ECG and TENS electrode pads, cooling patches and skin-contact patches, where conductivity, gel compatibility and long-wear adhesion interact.
• Specialty fixation products — wig tape, lace tape and double-sided adhesive strips, where clean peel and low residue matter more than high initial tack.

If a programme sits between two of these families, we review the finished product construction and recommend the adhesive system that supports it, including the liner and backing combination.

Specifications That Define a Medical Adhesive Roll

Adhesive rolls are specified as a system of adhesive, carrier and liner. The values below are the parameters we confirm with customers before a production run is scheduled.

• Adhesive chemistry and coat weight — grams per square metre, which sets tack, peel and shear performance.
• Carrier or backing — non-woven, PE film, silk, cotton cloth or foam, matched to the converting process and the intended wear time.
• Release liner — siliconised paper or film, selected for release force and dimensional stability during die-cutting.
• Roll dimensions — width, length, core diameter and roll diameter, aligned to the customer's coating or slitting equipment.
• Adhesion performance — peel adhesion, tack and shear holding values agreed against the customer's test method.
• Biocompatibility documentation — ISO 10993-relevant test evidence for skin-contact applications, prepared for the target market.
• Storage and shelf life — temperature, humidity and light conditions that protect adhesive performance before use.

Converting, Line Integration and Automation

Adhesive jumbo rolls are an input to the customer's line, so the roll has to behave predictably at speed. We review the converting route before fixing a specification, because unwind force, liner release and web tension interact differently on coating, lamination, rotary die-cutting and high-speed packaging equipment.

For automated lines we confirm splice requirements, maximum roll diameter, core material and the tension window the adhesive can tolerate. Where a customer runs multiple converting sites, we keep one adhesive specification and one test method across all deliveries so that output stays consistent between plants.

Quality Control and Acceptance

Our quality control team works to inspection procedures that support ISO 13485:2016 compliance, and our Suzhou factories comply with FDA requirements. Most of our products are CE certified, and we prepare the technical documentation needed for the customer's own regulatory submission.

• Incoming raw material checks on adhesive, backing and liner before production release.
• In-process monitoring of coat weight and roll formation during coating and rewinding.
• Finished roll inspection covering dimensions, adhesion performance and visual defects.
• Stability and microbiological testing where the application requires it, with sample retention and traceability records.
• Pre-shipment inspection against the agreed specification, with records issued with the shipment.

Acceptance criteria are agreed in writing before the first production batch, so that incoming inspection at the customer's plant uses the same limits as our outgoing inspection.

OEM, ODM and Customization Support

We operate OEM and ODM programmes for medical adhesive rolls, covering adhesive formulation, coat weight, roll width, core size, liner type and packaging format. Our technical team supports customers who need a formulation adjusted for a new backing, a lower peel profile for paediatric or geriatric skin, or a higher shear value for long-wear fixation.

Custom work follows a defined sequence: requirement confirmation, sample preparation, customer evaluation, revision rounds and then production release. Sampling typically runs 3–7 business days for standard requests, with 1–3 modification rounds depending on product type and development needs. Custom packaging and Pantone colour matching carry their own minimum order quantities, which we confirm at quotation stage.

Related Jumbo Roll Materials

Adhesive is one part of a complete raw material programme. Customers building a finished tape or dressing usually source several of these categories together.

• Jumbo Raw Material Roll — the parent range covering coated and uncoated roll materials for medical converting.
• Medical Tape Jumbo Roll — finished adhesive tape in master roll form for slitting and converting.
• Medical Tape Backing — non-woven, film and cloth carriers matched to the adhesive system.
• Release Paper — siliconised liners that control release force and die-cutting stability.

Information We Use to Configure Your Solution

A workable adhesive specification comes from the finished product backwards. These are the inputs our technical and sales teams use to prepare a configuration and quotation.

Packaging, Delivery and Serviceability

Adhesive jumbo rolls are packed to protect the adhesive face and liner during transport, with roll cores supported and outer wrapping sealed against moisture and dust. We confirm pallet configuration, labelling content and shipment documentation against the destination market before dispatch.

For ongoing programmes we keep retained samples and traceability records so that a later batch can be compared with the approved reference. Spare cores, liner and packaging materials can be supplied alongside repeat adhesive orders, and our sales and technical teams handle specification questions after delivery as part of normal account support.

Frequently Asked Questions

Which adhesive should be used for a long-wear medical tape?

Acrylic adhesives are the usual choice for long-wear fixation because they balance peel strength, shear holding and breathability over extended skin contact. For very delicate or compromised skin, a silicone adhesive gives a softer peel and supports repositioning. We confirm the wear duration and skin condition before recommending a system.

Can you supply adhesive rolls matched to our existing backing and liner?

Yes. We match the adhesive system to the backing and release liner already used on your line, or supply the complete combination of adhesive, backing and liner from our jumbo roll range. Providing a current sample and the roll dimensions lets us align the specification to your converting equipment.

What documentation is available for regulatory submissions?

We prepare technical documentation covering adhesive composition, coat weight, adhesion performance and ISO 10993-relevant biocompatibility evidence for skin-contact applications. Our quality system follows ISO 13485:2016, most products are CE certified, and our Suzhou factories comply with FDA requirements. Documentation is tailored to the target market of the finished device.

Do you support OEM and ODM adhesive development?

We run both. OEM covers production to your existing specification and brand, while ODM covers formulation and product development with our technical team. Sampling typically takes 3–7 business days, with 1–3 revision rounds depending on the product type and development needs.

What is the minimum order quantity for medical adhesive rolls?

Minimum order quantity depends on the adhesive system, roll format and packaging. For our medical consumables range, MOQ starts at 1,000–10,000 units per specification, and custom packaging or Pantone colour matching carries higher minimums. We confirm the exact figure with the quotation once the specification is fixed.

How should medical adhesive jumbo rolls be stored?

Store rolls in the original sealed packaging, away from direct sunlight, at stable temperature and moderate humidity. Adhesive performance and liner release can change if rolls are exposed to heat or moisture before converting. We state the recommended storage conditions with each shipment.