Double Sided Adhesive Strips Manufacturers

What Our Double Sided Adhesive Strips Range Covers

As a Double Sided Adhesive Strips Manufacturers, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.

Double sided adhesive strips are pressure-sensitive tapes coated on both faces, supplied with a release liner and die-cut into contours that follow the hairline, sideburn and nape areas. They are used to bond lace front wigs, wig caps, hairpieces and extensions to skin, and to hold hair system units during daily wear or extended wear cycles.

We organize the range by two variables that determine end use: adhesion duration and surface finish. Daily tapes prioritize clean removal and skin comfort; long-lasting tapes prioritize hold under heat, moisture and movement. Glossy surfaces suit invisible hairline placement, while matte non-greasy surfaces reduce shine under lighting and camera work.

Materials and Construction

A double sided adhesive strip is a layered construction: carrier film or non-woven core, adhesive on both faces, and a release liner that protects the skin-contact side until application. Carrier choice sets conformability and tear behavior; adhesive chemistry sets tack, peel, shear and residue; liner choice sets how cleanly the strip releases during fitting.

• Carrier: thin transparent film for invisible edges, or non-woven for softer drape over curved hairlines.
• Adhesive: acrylic systems for stable long-wear performance and clean removal; formulation tuned to skin contact and moisture exposure.
• Liner: release-coated paper or film, slit or full-width, selected for peel force that stays workable in salon conditions.
• Caliper: total thickness balanced against visibility and hold duration; thinner strips read more naturally at the hairline.
• Die-cut geometry: arcs, C-shapes, straight strips, tabs and multi-size sheets matched to hairline and perimeter zones.

Because we also produce the upstream materials, our Medical Adhesive and Release Paper selections are made together with the finished strip specification rather than sourced independently. That keeps peel behavior, liner release and converting yield consistent across repeat orders.

Critical Specifications for a Working Specification Sheet

Wig bonding performance is decided by a small set of measurable properties. We build the specification around the working point the product must survive: skin type, wear duration, climate, removal method and whether the unit is fitted by a professional or an end user.

• Peel adhesion: measured on the intended substrate, since skin, lace and polyurethane edges behave differently.
• Shear and holding power: determines whether the strip resists sliding under tension and scalp movement.
• Thickness and caliper: controls visibility at the hairline and flexibility over contours.
• Residue on removal: a key comfort and cleanup variable for daily products.
• Moisture and heat resistance: relevant to humid markets, exercise and extended wear.
• Liner release force: must stay peelable without stretching or tearing the strip during fitting.
• Die-cut accuracy: edge quality and dimensional consistency across a sheet or roll.

Converting, Capacity and Format Options

Our coating, rewinding, cutting and packaging operations run in a cleanroom environment under ISO 13485-aligned procedures. Double sided adhesive strips are converted from coated master rolls into the finished format the market requires, which allows us to hold one adhesive specification across several SKUs.

• Pre-cut contour strips on single or multi-size liner cards
• Continuous rolls for professional salon and barber use
• Sheet formats with mixed sizes for retail kits
• Bulk master rolls for converters and private-label packers
• Combined kits pairing strips with complementary wig bonding items

We operate three factories and can serve both large-volume programs and smaller trial orders, which is useful when a new contour or finish is being validated before full rollout. Our Wig Tape range and Lace Wig Tape formats are produced on the same converting base, so a program can move between strip, roll and lace-tape formats without changing adhesive source.

OEM and ODM Configuration

Most double sided adhesive strip programs are private label. We handle the full configuration path from shape, color and logo design through material, specification, size and packaging, so a brand can launch a complete product without coordinating separate converters and printers.

Sampling typically runs 3–7 business days for a first sample, with 1–3 modification rounds depending on product type and development needs. Customized samples may carry a sampling fee that offsets formulation, laboratory and raw material work; the exact cost is confirmed before development starts.

Quality Control and Documentation

Adhesive products are inspected against the specification at each stage, from incoming raw material through coating, converting and final packaging. Our quality control team follows documented inspection procedures to keep output aligned with ISO 13485:2016, and most of our products are CE certified with Suzhou factories complying with FDA requirements.

• Incoming checks on adhesive, carrier film and release liner
• Coating weight and adhesion verification during production
• Stability and microbiological testing for skin-contact products
• Sample retention and traceability records for each batch
• Final inspection of die-cut dimensions, liner release and pack count

Where a destination market requires specific documentation, we can produce formulas and paperwork aligned with EU and FDA requirements for the target region. Acceptance criteria are agreed before production so that incoming inspection at your warehouse matches the specification we built together.

Storage, Handling and Serviceability

Pressure-sensitive adhesive strips are sensitive to heat, sunlight and humidity. Storing them in a cool, dry place in original sealed packaging preserves liner release and tack through the shelf life. We mark cartons with batch information so stock can be rotated and traced.

• Apply to clean, dry skin free of oils, lotions and residue
• Press firmly for a few seconds to activate full contact
• Remove slowly with an adhesive remover where extended wear is involved
• Avoid storing opened packs in humid or hot environments

Repeat orders are produced to the retained specification and reference sample, so a reorder behaves like the batch you approved. Spare packaging components and additional strip formats can be added to an existing program as volumes grow.

Information We Use to Configure Your Solution

A workable proposal depends on the working point, not on a generic size list. The following inputs let us select adhesive, carrier, liner, contour and packaging in one pass.

Send the wear scenario, target contour, packaging direction and expected volume, and we will return a specification, sample plan and quotation built around that working point.

Frequently Asked Questions

What is the difference between daily and long-lasting double sided adhesive strips?

Daily strips are formulated for short wear cycles and clean removal with minimal residue, which suits consumer and salon use. Long-lasting strips use a higher peel and shear profile to hold through heat, moisture and movement over extended wear. We produce both from the same converting base, so the choice is a formulation decision rather than a different supply chain.

Should I choose a glossy or matte finish?

Glossy transparent strips disappear against lace front hairlines and transparent unit edges, where a reflective surface reads as natural skin. Matte or non-greasy strips reduce shine under studio lighting and on exposed partings, and are often preferred for camera work and sensitive skin. We can supply both finishes in the same contour set so a brand covers both use cases.

Can you produce custom contours and private-label packaging?

Yes. We handle shape, color and logo design through material, specification, size and packaging. Custom die geometry, multi-size liner cards, dispenser boxes and kit assemblies are all produced in-house, which keeps the new design inside our own supply chain from raw material to finished pack.

What is the minimum order quantity and sampling time?

MOQ for our medical consumables range starts at 1,000–10,000 units per specification, with Pantone color customization starting at 20,000 units and customized packaging at 100,000 units per packaging style. First samples typically take 3–7 business days, with 1–3 modification rounds depending on product type and development needs.

How do you control quality on adhesive strips?

We check incoming adhesive, carrier and liner, verify coating weight and adhesion during production, and inspect die-cut dimensions, liner release and pack count before shipment. Skin-contact products undergo stability and microbiological testing, and we retain samples with traceability records for each batch under ISO 13485:2016-aligned procedures.

Do you supply the raw materials behind the strips as well?

We coat and convert our own adhesive materials, and our Jumbo Raw Material Roll range covers adhesive, backing and release liner. That means a strip specification can be adjusted at the material level when a market needs different peel, shear or liner release behavior.